Camera Hacker

:

Add Comment | Related Links | TrackBack
Related Content

Modifying an AC adapter

I have a rig of 7 cameras that i use for autostereoscopic photography. Instead of replacing the batteries every time is it possible to take a single AC adapter and splice the output to drive all 7 cameras? Obviously i could get 7 adapters to do the same job but it adds a significant amount of bulk to the setup.

thanks.

cd

chris
Wed, 12 Mar 2008 17:11:49 +0000

Like most technical question, the answer depends. If the single AC adapter you are talking about is the one specifically made for that camera, then the answer is no, you can't. Because that AC adapter doesn't supply enough current for all 7 cameras. It's probably made to support only one.

On the other hand, if you are willing to build your own power supply, or buy a custom-built power supply, than yes, you can. You have to get an AC adapter that can supply enough current for all 7 cameras. The max current on the AC adapter you have times 7 is probably a good number. That number is going to be high, so the custom power supply is probably going to be quite big and fairly expensive (but don't take my word for it). Once you have the power supply, you can run 7 pairs of parallel wires to each of the cameras. And you should be set to go.

If all this sounds too troublesome, then your only other choice is to get 7 individual AC adapters that are made for your cameras.

Chieh Cheng
Wed, 12 Mar 2008 18:17:00 +0000

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 6 + 5?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.