I just bought a Nikon 50mm f1.8, the same model here:
http://www.keh.com/camera/Nikon-Manual-Focus-Fixed-Focal-Len . . .
I have one of the popular inexpensive Kawa adapters to use with it. It mounts fine to the lens and fine to the camera. However, when mounted to the camera the aperture ring is frozen, and cannot be changed. Is this the fault of the adapter, or the combination of that lens with that adapter?
Would a different adapter work fine with it?
I'm out of my depths with this and so any thoughts/advice welcome...
Sun, 01 May 2011 01:34:03 +0000
What camera did you mount the lens and the adapter to? Isn't this Nikon 50mm f/1.8 lens a completely manual lens, meaning that you change the aperture by manually rotating the aperture ring? What do you mean that it cannot be change? The aperture ring can't be rotated? Or the aperture ring can be rotated, but the aperture blades do not close?
Sun, 01 May 2011 03:05:11 +0000
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.