The MC-25 cable adapter converts a Nikon 2-pin remote, such as the MC-12A and MC-12B, into a Nikon 10-pin remote plug.
The 2-pin socket is found on the following cameras:
F-801, F-801s, N8008, N8008s
Pinout for the 2-pin socket is in this thread: Nikon MC-12A and MC-12B Pinout
The 10-pin remote socket is found on the following Nikon SLR models:
The attached PDF document shows the 10-pin connector pinout for the Nikon MC-25 adapter. The same information is also available on this web page.
Attached File: MC-25.PDF
Thu Nov 4 13:30:30 PST 2004
I'm puzzling out the Nikon GPS connection.
Nikon's own GP-1 $1,000 (yes, a thousand!) unit switches on and off with the camera. The $140 Geomet'r unit has its own on/off switch, independant of whether the camera is on or not. This suggests to me that there are (at least) two power lines, one switched, and one always on.
I guess that Pin 4 "Receive" gets the signal from the GPS, converted from RS232 to TTL in the MC-35 (or equivalent) external dongle?
In the four years since your helpful posting, have you made any further discoveries?
Sun, 16 Nov 2008 12:53:54 +0000
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.