you can make a homemade stun gun from
dispoable cameras just simply revomove the batter from the camer and take the conver off then put rubber gloves on then you remove the 2 copper wires going to the flash then make a protective box then glue then put the battery in
Mon, 17 Apr 2006 09:39:17 -0700
WORKS wonderfully. So simple yet so useful. I did some modification to it by putting it on a glow and having a wire on each finer coming from the flash wires, so that when a pair of fingers makes contact is when the shock comes out. I am in the provess of upping the juice as well. Thanks though.
Tue, 9 May 2006 17:02:09 -0700
YEA I REMEMBER ACCIDENTLY SHOCKING MYSELF FROM A CAMERAE FLASH I TOOK APART. HURT LIKE A BITCH. KINDA LIKE HOLDING THE COIL WIRE WHEN SOMEONE CRUNK OVER THE MOTOR.
HURT MUCH MORE AND DIFFERENTLY THAN WALL CURRENT 110 AC
Wed, 12 Mar 2008 17:36:43 +0000
I STRONGLY suggest you change the title of this page from "stun gun" to "zapper."
This device is significantly different from a 'stun gun' in that the voltage is MUCH LOWER (at least 10x), and the voltage does not oscillate. Due to the electrical differences, it will not incompacitate someone the way a 'stun gun' will and is more suitable for zapping friends as a gag.
Calling it a "stun gun" on this page creates 2 problems:
1. It gives people a false sense of what this device will do possibly endangering their own safety if they choose to use it.
2. The terms 'Taser' and 'stun gun' have legal implications in many states whereas a term like 'zapper' would not be so legally charged (excuse the pun). Just in the news today is a school kid in CT that is in trouble for building one as the fools out there think it somehow violates "The Constitution State's" restrictions on Tasers.
Although this is a fun project and can be the source of much amusement, please don't promote this as something it is not.
Thu, 03 Apr 2008 18:06:40 +0000
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.