I turned my camera on this morning and the View Finder, and LCD screen are both black. The "information" part of the camera is working - shows the resolution, battery left, pictures left, etc. An error message "E:02:00" is also flashing.
I can set the camera to flash, and different modes, and actually "take" a picture - though I have no idea what the picture might look like as I cannot view it on the screen.
Additionally, when I turn the camera on and off, there is a soft "clicking" noise for a few seconds.
I tried removing the battery and reinstalling it, as well as the media. I also reset the camera. The camera is still responding in the same way.
Does anyone know what the error message (I assume that is what I see flashing) means? I've looked in the Instruction manual, and this error message is not shown.
Thanks a bunch.
Fri Mar 25 14:50:00 PST 2005
When you reset the camera, did you press the RESET button inside the battery/memory stick cover?
Did you look at the memory card to see whether a picturew was taken?
Sun Mar 27 09:48:57 PST 2005
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.