The Canon N3 shutter release trigger connector, found on higher-end Canon EOS cameras, has 3 connector pins. The male connector is designed onto the camera body ...

It connects to the Canon Compact Power Adapter CA-PS400. As you can see it is a proprietary connector that I have never seen before. If you know where to get ...

The battery pack has four electrical female pins. If you look at the bottom of the battery with the pins toward the top, you'll see that the left-most pin is ...

One of the pins on the T3 connector is indented. All three pins are spring-loaded and can fully retract into the connector body.

PDA wireless control for digital cameras that are compatible with the RC-5 infrared remote. Canon N3 Connector Pin-Out For Canon EOS 1D, 1Ds, 1D ...

Step-by-step procedure to modify your Canon N3 accessory to use on Canon E3 cameras.

When the button on the remote control is pushed all the way, all three contact sections are shorted together, causing the camera shutter to be released. Pin 1 ...

So I attached a 9-volt battery to the BP-511 battery pack and plugged it into the Canon BG-ED3 Battery Grip (see photo below) and turned on the camera. Quite ...

Oct 8, 2007 · The camera registers a voltage between the + power terminal and the dummy terminal - this allows the camera to determine if the power source is ...