If the film is loaded back into the camera, the frame starts at frame 1. To wind the film to the correct position, turned off the flash and kept pressing the ...

May 20, 2008 · Surfing around on the Internet today, I came across an article to turn your Panasonic Lumix DMC-FZ1 digital into a DMC-FZ2 simply by upgrading ...

Jan 26, 2009 · Would it be at all possible to modify the firmware to change the whiteness or change the shutter speed? Neither would need to be changeable ...

Jul 2, 2016 · There is no disc needed for time change. 1.) Turn on your camera. 2.) Press the center "Set" button and an array of options should show for you ...

After playing with a half-exposed Elph Jr. film cartridge, here is a neat trick I learnt: the Canon IX can load a partially-exposed Elph Jr. cartidge to the ...

I know this is a very old thread but I wanted say how helpful it was. I was able to find the Radio Shack connectors on eBay and successfully converted my TC- ...

May 6, 2007 · First of all, if the lens is dirty, use a soft cotton cloth to wipe it clean. ... it all depends on the distance folks. The distance between the ...

Sony cybershot: I push power to turn on camera and get a black screen with the word 'access' and the lens goes in and out continually. Any suggestions? Battery ...

One of the best feature of the APS format is to be able to change film in mid-roll, on the fly. The APS camera automatically rewinds the film into the cartridge ...

Yes. But on the IX, if you change the indicator of the cartridge to the un-exposed setting, the camera will wind it to frame 1.