In order to do so, we need to understand the pin-out for all of the connectors and contacts. The picture above is the connector at one end of the DR-400 cable.

Using 9-Volt Battery with Canon EOS DSLR. The BP-511 battery packs for my Canon EOS D30 digital camera died one by one over the last ten years.

Several years ago, I bought an used Canon BG-E1 vertical battery grip for my Canon EOS Digital Rebel digital SLR camera. When I received the vertical grip ...

I got a Err 84 on my d30 today. I changed the small battery but it won't take a photo. Now it locks the power on and I am unable to do anything with the camera.

DESCRIPTION: This error occurs in the following conditions: When electronic communication with the lens cannot be established, after the EOS D60 is powered ON ...

I am trying to remote control my Canon EOS Elan 7e with a remote control software on Sony Clie PDA. Software is Clie RMC and I need the correct device ID and ...

In the battery bay of the Canon EOS Rebel T3i digital SLR camera body, there are only three male battery pins. The missing pin is pin 'D'. See photo below.

When the button on the remote control is pushed all the way, all three contact sections are shorted together, causing the camera shutter to be released. Pin 1 ...

In this article, I will show you how I turned my dead Canon BP511 into a dummy battery interface for experimental purposes. After disassembly the battery pack, ...

The T3 connector is actually very similar to the N3 connector; it has three pin connectors that are configured in a happy face formation. But unlike the plug-in ...