NikonRepair
Saturday 2008/05/17
| Sat, 17 May 2008 05:30:30 GMT |
Manual for MF 500mm f/4P
Is there a manual available for the MF 500mm f/4P lens? I would like to pull it apart to regrease the helicoids since the manual focusing ring feels a bit |
| Fri, 16 May 2008 17:01:02 GMT |
Re: nikkor 50 f1.8 blades cleaning
Sorry, The pdf file is already on the file section of NikonReair. Go on Files and download : Nikon AF 50mm f1.8 New Ser#4000001 & up PartsDiagram.PDF Nikon AF |
| Fri, 16 May 2008 16:57:48 GMT |
Re: nikkor 50 f1.8 blades cleaning
Hello, There is no lock screw. You just have to find a rubber cork who have the same size as the front piece. I'v found one from a big glass from my chemist |
| Fri, 16 May 2008 15:21:32 GMT |
Re: nikkor 50 f1.8 blades cleaning
Robert I think the front piece you want to remove unscrews. But look for a lock screw anyhow. You can remove it by using a piece of rubber like a jar cap |
| Fri, 16 May 2008 13:38:57 GMT |
nikkor 50 f1.8 blades cleaning
Hi, I took a lot of pictures during a wind+sand storm, and after the photo session i noticed that a lot of sand entered inside my nikkor. I decided to unmount |
| Tue, 13 May 2008 15:37:42 GMT |
Re: Vista/ Nikon software for Coolscan III LS-30 scanner
Hi Diana, I haven't used the LS-30 but I have had the LS-2000, for which the Nikon software is likely to be similar. I also have never touched Vista and never |
| Fri, 09 May 2008 23:04:01 GMT |
Nikon D1X external power input connector (where a EH-4 would plug in
I used to clean my sensor with a clone mc-30 with the camera set to B, works great and holds the mirror in the up position as long as the battery has a charge. |
| Fri, 09 May 2008 02:28:35 GMT |
Re: FM light meter repair question
Mark I had an FM that had a meter that had a bit of rust on the pivots preventing movement. I had to replace the meter. Possibly you could shake the camera to |
| Fri, 09 May 2008 02:25:45 GMT |
Re: FM light meter repair question
To add a bit more to Jon's question: is this little tab in place so that it will catch the stepped rear edge of the lens aperture ring? The FM has a feature |
| Fri, 09 May 2008 02:23:31 GMT |
Re: FM light meter repair question
Hi, Mark. Can you tell if the little tab which follows the lens tab is free to rotate? (I'm keeping this as simple as possible...there is a tab on the body |
| Fri, 09 May 2008 00:15:58 GMT |
Re: Nikon D1X external power input connector (where a EH-4 would plu
Hi all, Hi Ken, Ken wrote: "..I always found that I could just dial-down the exposure to "bulb" and then vacuum clean the sensor (without touching it) merely |
| Fri, 09 May 2008 00:09:20 GMT |
Re: Nikon D1X external power input connector (where a EH-4 would plu
Hi all, Harri wrote: "..With the risk of the mirror snapping down if something goes wrong. :).." What's to go wrong? If you follow my instructions EXACTLY it |
| Thu, 08 May 2008 20:22:10 GMT |
Re: Nikon D1X external power input connector (where a EH-4 would plu
vb_MCSE |
| Thu, 08 May 2008 20:01:57 GMT |
Vista/ Nikon software for Coolscan III LS-30 scanner
Hi! Not sure where to post this, but since someone in this group is most likely to have one of these scanners, I thought I'd post here. Anyway, I have a |
| Thu, 08 May 2008 19:59:52 GMT |
Re: Cleaning Nikon Coolscan IV ED
I asked my local camera repair guy about it (including a webpage on how to) and his price was $100. How to Clean a Nikon Super Coolscan 5000 ED |
RSS feed content copyright by NikonRepair at Yahoo! Groups and/or respective authors.
42 Users Online
|
|
$10000-above
$5000-$9999
$2000-$4999
$1000-$1999
$500-$999
$200-$499
$100-$199
$50-$99
$25-$49
$0-$24
Gift Certificate
