Camera Hacker

: :

Add Comment | Related Links | TrackBack
Related Content

Sony P93 internal hack -Help??

Looking to hack the Sony p93 for use with a controller unit.

Desp need the internal points for common power and shutter controls if anyone can help

db
Wed Mar 9 12:27:03 PST 2005

Have you taken apart your DSC-P93 yet?

On the Sony DSC-P92 the common power is really easy to spot. If you have ever taken apart your PC then you have seen the 4-wire power connectors that goes to the hard drives and disk drives. The P92 has one of these that connects to the circuit board . . . just a miniature version.

If you want to see a picture, I have it at home on my hard disk.

Chieh Cheng
Wed Mar 9 12:59:20 PST 2005

Chieh

If you have a pic of the internals of the p93 that would be great. I haven't ripped it apart yet as im familiar with hacking the p41 at the moment (Very simple to modify with a servo connector) and didn't want to destroy the p93.
You mention the P92. Is this identical to the P93?

The points I need to locate and solder to apparently are incredibly tiny and easy to damage due to its closeness to other points.
If they are the same as the P92 and if yr able to annotate where the power common and shutter are that'd be great

Look forward to seeing it. Hopefully I wont blow the sucker up...

regards

db
Thu, 10 Mar 2005 08:38:30 +1000

I don't have a pic of the P93. But I'll send you the P92 pic, when I get home, so that you have a reference. I can't imagine the P92 and P93 being that much different, but you'll find out.

Chieh Cheng
Wed, 9 Mar 2005 13:58:18 -0800 (PST)

Thanks for that,
Ill open it up once i see the annotations if you know the points im looking for and see if its the same

db
Thu, 10 Mar 2005 09:06:47 +1000

I have attached the picture. See the four different color wires going from the camera to the circuit board? I bet that's the power cable.

Attached Image:

Sony DSC-P92 Power Cable.jpg

Chieh Cheng
Wed Mar 9 22:11:14 PST 2005

Could be, but I think the ribbon cable with the 5 contacts near the shutter button is where i need to be for common power and shutter contact.

Anyone whos knows the p93 please fess up!

db
Thu Mar 10 11:56:06 PST 2005

Use a digital multimeter on the ribbon cable by the power switch and the wires on the circuit board. If the common ground is the same, then it'll be easier to draw power from the wires than the ribbon cable. The ribbon cable are surface mount type and are very difficult to fix if you screw up.

Chieh Cheng
Thu Mar 10 21:52:26 PST 2005

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 7 + 5?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.