I came up with a relatively inexpensive repair that replaces two of the plastic strikers that break with adjustable brass pins. You can do it yourself or I'll ...

Taking it apart is quite easy. Use a sharp X-acto knife to slice around the seam. The seam is just a really thin piece of plastic. Note that the charging ...

Mine showed a terminal voltage of 0.8v so I thought I was on the right track. I gave it a "boost charge", resoldered it back in circuit, reassembled the camera.

Just had the E:61:10 error on my DSC-T1 for about 3 days. Tried everything sensible - reset, remove card, battery etc - nothing worked. I come to learn it's a ...

DCR PC5E Error code C 21:00. I have a Sony DCR PC5E that keeps displaying the error code C21:00 & showing a yellow symbol in the middle of the screen.

May 16, 2007 · You can verify this by removing the plastic cover and removing the cassette tape. Then close the mechanism and watch the pin as it gets pulled ...

Aug 13, 2006 · If you are, look carefully for a hole in the plastic frame which have a bolt at its bottom. It's hard to see it at first.

IBM PC Camera Disassembly. Every Halloween, I'd set up a web cam for our haunted house to capture the festivity that goes on that night.

Sony cybershot: I push power to turn on camera and get a black screen with the word 'access' and the lens goes in and out continually. Any suggestions? Battery ...

Recently, I had obtained a Digital Rebel. It worked with the lens fine at wide-open aperture. When stopped down, the camera goes into error state. After ...