i have a sony cybershot dsc t10 camera which shows error message E:61:10...i tried taking the battery out and tapping it on the sides..IT DID NOT WORK..i tried ...

May 23, 2011 · E:91:01 Error Code on Sony Cyber-shot DSC-W55 · 1. Turn OFF cam · 2. Remove the battery or the power supply · 3. Turn the switch to CAMERA for ...

"A malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized Sony service facility and inform them of the 5-digital code.".

Jun 13, 2008 · I have a DSC-W5 and I had the same problem and error message (E:61:00). I fixed it by turning it on, whacking it on the palm of my hand a few ...

Jul 26, 2007 · Sony cybershot: I push power to turn on camera and get a black screen with the word 'access' and the lens goes in and out continually. Any ...

Jan 18, 2015 · Same problem on my HX400v. I found an easier way to fix it - when starting the camera extend the zoom immediately and the error doesn't appear.

May 29, 2007 · For E:91:xx the camera manual says: "A camera malfunction has occurred. Reset the camera (page 74), then turn the power on again." The following ...

Excerpt: I had been receiving E62 error in DSC H2 recently purchased. I found that the internal battery which controls the clock had discharged. So i allowed ...

Less smooth, but a professional feel. Great for taking snapshots from recorded video; Slightly better focusing (according to Sony�s manual). Widescreen (60 ...

The idea is to drill a hole through the cover to expose the LED. You can do this mod with an electric drill and a small drill bit. I used a 1/16" drill bit to ...